RESEARCH PAPER
A New Method of the Positioning and Analysis of the Roughness Deviation in Five-Axis Milling of External Cylindrical Gear
1
Department of Manufacturing Techniques and Automation, Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, ul. W. Pola 2, Budynek C, Rzeszów, 35-959, Poland
Submission date: 2022-02-07
Acceptance date: 2022-04-24
Online publication date: 2022-06-15
Publication date: 2022-09-01
Acta Mechanica et Automatica 2022;16(3):207-214
KEYWORDS
ABSTRACT
Five-axis milling is a modern, flexible and constantly developing manufacturing process, which can be used for the machining of external cylindrical gears by means of cylindrical end mills and special disc mills on universal multi-axis machining centres. The article presents a new method of positioning the tip and the axis of the end mill and the disc cutter in order to ensure a constant value of deviation of the theoretical roughness Rth along the entire length of the tooth profile. The first part presents a mathematical model of the five-axis milling process of the cylindrical gear and an algorithm for calculating the Rth deviation values. The next section describes the positioning of the end mill and the disc cutter. Then, a new method for the empirical determination of the distribution of the involute root angle Δui and the data description by means of the interpolation function are presented and described. In the conducted numerical tests, the influence of the geometrical parameters of the cylindrical gear on the deviation Rth is determined, assuming a constant Rth value in the five-axis milling process.
REFERENCES (20)
1.
Burek J, Gdula M, Płodzień M, Buk J. Gear’s tooth profile shaping in dialog and parametric programming. Mechanik. 2015 Feb;2:142/7.
2.
Safarov DT, Kondrashov AG, Khafizov II. Improving the process efficiency of helical gears’ toothed rims at the stage of preproduction. IOP Conference Series: Materials Science and Engineering. 2019;570(012024).
3.
Gaiser U. 5-Axis Gear Manufacturing Gets Practical. Gear Technology. 2017;(March/April):32–4.
4.
Karpuschewski B, Knoche HJ, Hipke M. Gear finishing by abrasive processes. CIRP Annals - Manufacturing Technology. 2008;57(2): 621–40.
5.
Krömer M, Sari D, Löpenhaus C, Brecher C. Surface Characteristics of Hobbed Gears. Gear Technology [Internet]. 2017 [cited 2020 Feb 4];(July):68–75. www.geartechnology.com].
6.
Klocke F, Brumm M, Staudt J. Quality and surface of gears manufactured by free form milling with standard tools. Gear Technology. 2015;(January/February):64–9.
7.
Staudt J, Löpenhaus C, Klocke F. Performance of Gears Manufactured by 5-Axis Milling. Gear Technology [Internet]. 2017:58–65. www.geartechnology.com].
8.
Staudt J, Exner P. Einfluss der Oberflächenstruktur beim 5-Achs-Fräsen von Verzahnungen auf das Einsatzverhalten [Internet]. 2017 [cited 2020 Jan 24]. www.fva-net.de.
9.
Guo E, Ren N, Liu Z, Zheng X, Zhou C. Study on tooth profile error of cylindrical gears manufactured by flexible free-form milling. International Journal of Advanced Manufacturing Technology. 2019;103(9–12):4443–51.
10.
Deng XZ, Li GG, Wei BY, Deng J. Face-milling spiral bevel gear tooth surfaces by application of 5-axis CNC machine tool. International Journal of Advanced Manufacturing Technology. 2014;71(5–8):1049–57.
11.
Shih YP, Chen SD. A flank correction methodology for a five-axis CNC gear profile grinding machine. Mechanism and Machine Theory [Internet]. 2012;47(1):31–45. http://dx.doi.org/10.1016/j.me....
12.
Shih YP, Sun ZH, Wu FC. A disk tool cutting method for bevel gear manufacture on a five-axis machine. International Journal of Advanced Manufacturing Technology. 2018;94(1–4):855–65.
13.
Talar R, Jablonski P, Ptaszynski W. New method of machining teeth on unspecialised machine tools. Tehnicki Vjesnik. 2018 Feb 1;25(1):80–7.
14.
Talar R, Jablonski P. Modelling of spur gear cutting kinematics for multipurpose milling center. In: 2016 21st International Conference on Methods and Models in Automation and Robotics. Institute of Electrical and Electronics Engineers Inc.; 2016. p. 1133–6.
15.
Özel C. A study on cutting errors in the tooth profiles of the spur gears manufactured in CNC milling machine. International Journal of Advanced Manufacturing Technology. 2012;59(1–4):243–51.
16.
Solf M, Bieker R, Löpenhaus C, Klocke F, Bergs T. Influence of the machining strategy on the resulting properties of five-axis hard-milled bevel gears. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2019;233 (21–22):7358–67.
17.
Suh SH, Lee ES, Kim HC, Cho JH. Geometric error measurement of spiral bevel gears using a virtual gear model for STEP-NC. International Journal of Machine Tools and Manufacture. 2002 Feb;42(3):335–42.
18.
Chmielik IP, Czarnecki H. Evaluation of gear tooth 3D surface topography. Mechanik. 2015 Jul;7:101–10.
19.
Litvin FL, Fuentes A. Gear Geometry and Applied Theory. Gear Geometry and Applied Theory. Cambridge University Press; 2004.
20.
Twardoch K. Digital Geometric Modelling of Teeth Profile By Using Cad Methodology. Scientific Journal of Silesian University of Technology Series Transport. 2014;82:271–9.
| eISSN: | 2300-5319 |
| ISSN: | 1898-4088 |
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
