RESEARCH PAPER
Measurement of Air Springs Volume Using Indirect Method in the Design of Selected Pneumatic Devices
1
Faculty of Mechanical Engineering, Technical University of Košice, Letná 9, 040 01, Košice, Slovakia
Submission date: 2016-04-14
Acceptance date: 2018-03-02
Online publication date: 2018-04-04
Publication date: 2018-03-01
Acta Mechanica et Automatica 2018;12(1):19-22
KEYWORDS
ABSTRACT
At our department, we deal with continuous tuning of torsional oscillating mechanical systems (TOMS) during their operation in terms of torsional oscillation size. Therefore, a new mobile mechanical system was built for purposes of research and presentation of the TOMS continuous tuning using extremal control method, which main advantage is that we do not need to know a mathematical model of the mechanical system. The new mobile device is equipped with a special compressed air distribution system, which important components are air springs. The air springs are modified and used as air pressure tanks with various functions in the mobile device. Therefore, it is important to know the magnitude of the air springs inner volume. This paper deals with determination of air springs volume using indirect method, which is based on the air pressure measurement and also the comparison of obtained results with the results computed from air springs manufacturer data.
REFERENCES (24)
1.
Abbas R., Ihmels C., Enders S., Gmehling J. (2011), Joule–Thomson coefficients and Joule–Thomson inversion curves for pure compounds and binary systems predicted with the group contribution equation of state VTPR, Fluid phase equilibria, 306, 181-189.
2.
Baworski A., Garbala K., Czech P., Witaszek K. (2015), Estimation of the ability to use a mass of air from a moving vehicle in wind turbine propulsion, Scientific Journal of Silesian University of Technology, Series Transport, 88, 5-17.
3.
Czech P. (2014), Conception of use vibroacoustic signals and neural networks for diagnosing of chosen elements of internal combustion engines in car vehicles, Scientific Journal of Silesian University of Technology, Series Transport, 82, 51-58 (in Polish).
4.
Czech P., Wojnar G., Burdzik R., Konieczny Ł., Warczek J. (2014), Application of the discrete wavelet transform and probabilistic neural networks in IC engine fault diagnostics, Journal of Vibroengineering, 16, 1619-1639.
5.
Dresig H., Holzweißig F. (2007), Dynamics of Machines, Springer, Berlin Heidelberg (in German).
6.
Grega R. (2014), Examination of applicated pneumatic flexible coupling and its effect on magnitude of vibrations in drive of belt conveyer, Scientific Journal of Silesian University of Technology. Series Transport, 85, 21-25.
7.
Haľko J., Pavlenko S. (2012), Analytical suggestion of stress analysis on fatigue in contact of the cycloidal - vascular gearing system, Scientific Journal of Silesian University of Technology. Series Transport, 76, 63-66.
8.
Handrik M., Vaško M., Kopas P., Sága M. (2014), Effective finite element solution and post-processing for wide load spectrum, Communications, 16(3A), 19-26.
9.
Homišin J. (2002), New types of pneumatic flexible shaft couplings: development, research, application, Vienala, Košice (in Slovak).
10.
Homišin J. (2014), New methods for tuning of mechanical systems during operation in steady state, Scientific Journal of Silesian University of Technology. Series Transport, 85, 49-55.
11.
Homišin J., Kaššay P. (2014), Experimental verification of the possibility using pneumatic flexible shaft couplings for the extremal control of torsional oscillating mechanical system, Diagnostyka, 15(2), 7-12.
12.
Homišin J., Urbanský M. (2015), Partial results of extremal control of mobile mechanical system, Diagnostyka, 16(1), 35-39.
13.
Klenovčanová A. (2007), Thermomechanics, Faculty of mechanical engineering, Technical University of Košice (in Slovak).
14.
Kohl O, Pešík L. (2016), Evaluation of a driver's seat's dynamic properties, Scientific Journal of Silesian University of Technology. Series Transport, 91, 59-69.
15.
Łazarz B., Wojnar G., Madej H., Czech P. (2009), Evaluation of gear power losses from experimental test data and analytical methods, Mechanika, 80(6), 56-63.
17.
Meret (2017), Pressure transmitters type TSZ with a sensor with metal diaphragm. Accessed: 13.04.2016. Available at: http://www.meret.sk/en/produkt....
18.
Pešík L., Němeček P. (1997), Monitoring of vibration of machines with an elastic support, Insight, 39, 566-568.
19.
Rubena (2016), Rubber-textil products, air springs. Accessed: 31.03.2016. Available at: http://www.rubena.cz/air-sprin....
20.
Sapietová A., Dekýš V. (2016) Dynamic analysis of rotating machines in MSC.ADAMS, Procedia Engineering, 136, 143-149.
21.
Scully, L. (2015), Make pneumatic connections air tight. Accessed: 13.04.2016. Available at: http://www.hydraulicspneumatic....
22.
Sturm M., Pešík L. (2017), Experimental determination and simulation of spring-tensions under working conditions of a vibrating bowl feeder, Acta Mechanica et Automatica, 11, 243-246.
23.
Urbanský M., Kaššay, P. (2015), The new realized mobile device for extremal control research and presentation, Scientific Journal of Silesian University of Technology. Series Transport, 89, 173-178.
24.
Wojnar G. (2010), Using of torsional vibrations velocity for the detection of toothed wheels' fault, Scientific Journal of Silesian University of Technology. Series Transport, 66, 123-128.
| eISSN: | 2300-5319 |
| ISSN: | 1898-4088 |
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
