RESEARCH PAPER
Modelling the Meshing of Cycloidal Gears
1
Bialystok University of Technology, Department of Mechanical Engineering, Faculty of Mechanical Engineering, ul. Wiejska 45C, 15-351 Białystok, Poland
Submission date: 2015-06-16
Acceptance date: 2016-05-16
Online publication date: 2016-06-08
Publication date: 2016-06-01
Acta Mechanica et Automatica 2016;10(2):137-140
KEYWORDS
ABSTRACT
Cycloidal drives belong to the group of planetary gear drives. The article presents the process of modelling a cycloidal gear. The full profile of the planetary gear is determined from the following parameters: ratio of the drive, eccentricity value, the equidistant (ring gear roller radius), epicycloid reduction ratio, roller placement diameter in the ring gear. Joong-Ho Shin’s and Soon-Man Kwon’s article (Shin and Know, 2006) was used to determine the profile outline of the cycloidal planetary gear lobes. The result was a scatter chart with smooth lines and markers, presenting the full outline of the cycloidal gear.
REFERENCES (16)
1.
Bednarczyk S. (2013), Cycloidal gear development focused on the transfer of efficiency of the machines, In: Idzikowski A.: Efficiency of working machines and equipment in the industry, Press WZ PCz, Czestochowa, 117-225.
2.
Bednarczyk S. (2014), Determination of the gear geometry of the of the cyclo gear, Silesia University of Technology Scientific Notebooks, Gliwice, 29-39.
3.
Blagojevic M., Kocic M., Marjanovic N., Stojanovic B., Dordevic Z., Ivanovic L., Marjanovic V. (2012), Influence of the friction on the cycloidal speed reducer efficiency, Journal of the Balkan Tribological Association, 18(2), 217-227.
4.
Chmurawa M. (2002), Cyclo gear meshing with modification, Silesia University of Technology Scientific Notebooks, Gliwice, No. 1547, 21-39.
5.
Feng P. H., Litvin F. L. (1996), Computerize design and generation of cycloidal gearing, Mechanism and Machine Theory, 31 (7), 891-911.
6.
Figliolinii G., Stachel H., Angeles J. (2013), On Martin Disteli’s spatial cycloidal gearing, Mechanism and Machine Theory, 60, 73-89.
7.
Hong-Liu Y., Jin-Hua Y., Xin H., Ping S. (2013), Study on teeth profile modification of cycloid reducer based on non-Hertz elastic contact analysis, Mechanics Research Communications, 48, 87-92.
8.
Hwang Y.-W., Hsieh Ch.-F. (2007), Determination of surface singularities of a cycliodal gear drive with inner meshing, Mathematical and Computer Modelling, 45, 340-354.
9.
Kabaca T. (2013), A model teaching for the cycloid curves by the use of dynamic software with multiple representions approach, Academic Journals, Vol. 6(3), 40-50.
10.
Meng Y., Wu Ch., Ling L. (2007), Mathematical modeling of the transmision performance of 2K-H pin cycloid planetary mechanism, Mechanism and Machine Theory, 42(7), 776-790.
12.
Shin J., Know S. (2006), On the lobe profile design in a cycloid reducer using instant velocity center, Mechanism and Machine Theory, 41(5), 487-616.
13.
Siczek K., Warda B. (2008), Using of cycloidal gear in car selfstarter, Journal of KONES Powertrain and Transport, 15(4), 509-516.
14.
Sung L. M., Tsai Y.C. (1997), A study on the mathematical models and contact ratios of extended cycloid and cycloid bevel gear sets, Mechanism and Machine Theory, 32 (1), 39-50.
15.
Wang W.-S., Fong Z.-H. (2008), A dual face-hobbing method for the cycloidal crowning of spur gears, Mechanism and Machine Theory, 43(11), 1416-1430.
16.
Yan H. S., Lai T. S. (2002), Geometry design an elementary planetary gear train with cylindrical tooth-profiles, Mechanism and Machine Theory, 37(8), 683-686.
| eISSN: | 2300-5319 |
| ISSN: | 1898-4088 |
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
