RESEARCH PAPER
SOFTWARE SUPPORT DEVELOPMENT FOR NUMERICAL SOLUTION OF ANSYS CFX
1
Faculty of Mechanical Engineering, Technical University in Kosice, Department of Power Engineering, Vysokoškolská 4, 042 00 Košice, Slovak Republic
Online publication date: 2014-03-11
Publication date: 2013-12-01
Acta Mechanica et Automatica 2013;7(4):215-221
KEYWORDS
ABSTRACT
The paper deals with possibilities to apply a new developed software support for simulation programme ANSYS CFX. A direct export of heat-transfer coefficients into variables used under edge conditions as well as of physical properties of gas mixtures into material properties during simulation solution of technical tasks means a significant saving of time. The paper summarizes in detail description of the software for calculation of heat-transfer coefficient during free convection (HTC-FC) and of material properties of gas mixture (MPGM) that enable to export calculated data directly into the text files which can be imported then into the programme ANSYS CFX.
REFERENCES (23)
1.
Badida, M., Lumnitzer, E., Biľová, M., Fiľo, M. (2008), The uncertainties of environments parameters measurements as tools of the measurements quality improvement, Univerzitet u Kragujevcu.
2.
Durdán M., Laciak, M., Kačur, J. (2009), Mathematical modelling of the UCG process, AGH University of Science and Technology, Krakow, 407- 410.
5.
Jossi, J. A., Stiel, L. I., Thodos, G. (1962), The viscosity of pure substances in the dense gaseous and liquid phases, AIChEJ, 8,59.
6.
Kalaš, J., Lucskay, J., Vranayová, Z. (2000), Air infiltrationnonsteady processes in dwelling rooms of apartments experimental research,Zeszyty naukowe Politechniki Rzeszowskiej, 32, Rzeszów, 157-163.
7.
Kapjor, A., Jandačka, J., Malcho, M., Papučík, Š. (2010), Intensification of Heat Transport from the Floor Convector at Given Geometry and the Way of Use, XXIX medzinárodná konferencia Setkání kateder mechaniky tekutin a termomechaniky, 101- 104.
8.
Kizek, J., Lazič, L. (1999), Simulation method for optimization of a mixture of fuel gases, Metalurgija, Vol. 38, No. 2, 109-113.
9.
Knapp, H. et al. (1982), Vapor-Liquid Equilibria for Mixtures of Low Boiling Substances, Chem. Data Ser., Vol. 6, DECHEMA.
10.
Mansoori, Z., Saffar-Avval, M., Tabrizi, B. H., Ahmadi, G. (2002), Modeling of heat transfer in turbulent gas-solid flow, International Journal of Heat and Mass Transfer, Vol. 45, No. 6, 1173- 1184.
11.
Michalec, Z., Taraba, B., Bojko, M., Kozubková, M. (2010), CFD modelling of the low-temperature oxidation of coal, Archivum Combustions, Vol. 30, No. 3, 133-144.
12.
Oravec, M., Števo, S., Sekaj, I. (2010),Comparison of Using Simple Genetic Algorithm and Parallel Genetic Algorithm in Heat Transfer Model Optimization, Journal of Cybernetics and Informatics. Vol. 9, 13-18.
13.
Purcz, P. (2001), Parallel algorithm for spatially one- and twodimensional initial-boundary-value problem for a parabolic eauation, Kybernetika, Vol. 37, no. 2, 171-181.
14.
Purcz, P. (2006) Communication complexity and speed-up in the explicit difference method. Parallel Processing Letters. Vol. 16, no. 3, 313-321.
15.
Pyszko, R., Příhoda, M., Velička, M. (2010), Method for determining the thermal boundary condition in the CC mould for numeric models, In Proceedings of 19 conference METAL, Ostrava.
16.
Rajzinger, J. (2012), Calculation of maximum water content in various natural gases by using modified Peng-Robinson equation of state, Communications, Vol. 14, No. 4A, s. 29-35.
17.
Setoodeh, N., Rahimi, R., Ameri, A. (2011), Modeling and determination of heat transfer coefficient in a basin solar still using CFD, Desalination, Vol. 268, No. 1-3, 103-110.
19.
Tauš, P., Kudelas, D. (2012), Počítačové modelovanie prevádzkových parametrov prototypov slnečných vzduchových kolektorov na báze recyklovaných plastov, TechCON Magazín, Vol. 8, No. 3, 37-40.
20.
Tkáč, J., Hvizdoš, M. (2008), Metán hydrát a jeho využitie na energetické účely, ALER Žilina: EDIS, 53-59.
21.
Trebuňa, P., Kliment, M., Halčinová, J., Fiľo, M., Markovič, J. (2013), Developments in field of data processing through PDM, PLM and the use of system Teamcenter nowadays, Sborník příspěvků: 3, Valtice. - Plzeň, SmartMotion, 2013, 190-194.
22.
Ullmann, F. (2005), Ullmann's Chemical Engineering and Plant Design, Vol. 1-2, John Wiley & Sons.
23.
Vranay, F., Vranayová, Z. (1999), One-pipes systems hydraulic regulation, Systemy a technologie ogrzewania budynków, Solina, 225-230.
| eISSN: | 2300-5319 |
| ISSN: | 1898-4088 |
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
