RESEARCH PAPER
Stress Distribution in a Composite Coating by Local Loading of the Free Surface
 
More details
Hide details
1
Faculty of Mechanical Engineering, Bialystok University of Technology ul. Wiejska 45C, 15-351 Bialystok, Poland
 
 
Online publication date: 2014-08-15
 
 
Acta Mechanica et Automatica 2014;8(2):83-87
 
KEYWORDS
ABSTRACT
A three-dimensional problem of the theory of elasticity for halfspace with multilayered coating with periodical structure is considered. The fundamental layer consists of two layers with different thicknesses and different mechanical properties. The coating is described by the homogenized model with microlocal parameters. The solution is derived by using integral Fourier transform. Calculations were conducted with the assumption of elliptical distribution of normal and tangential tractions applied to the surface of the layered system in a cir-cular area. Analysis of the stresses was restricted to the first principal stress distribution.
REFERENCES (15)
1.
Bragallini G.M., Cavatorta M.P., Sainsot P. (2003), Coated Contacts: a Strain Approach, Tribology International, Vol. 36, 935941.
 
2.
Elliot D.A. (1949), Three-Dimensional Stress Distributions in Aeolotropic Hexagonal Crystals, Cambridge Phil. Society, Vol. 44, 522-533.
 
3.
Guler M.A., Erdogan F. (2007), The frictional Sliding Contact Problems of rigid parabolic and cylindrical stamps on Graded Coatings, Int. J. Mech. Sci., Vol. 49, 161-182.
 
4.
Kaczyński A. (1994), Three-Dimensional Thermoelasic Problems of Interface Crack in Periodic Two-Layered Composites, Engineering Fracture Mechanics, Vol. 48, 783-800.
 
5.
Kołodziejczyk W., Kulchytsky-Zhyhailo R. (2013), Stress Distribution in Two-Layered Half-Space with Periodical Structure Caused by Hertz Pressure, J. Theor. Appl. Mech., Vol.51, 741-750.
 
6.
Kulchytsky-Zhyhailo R. (2011), Two-Layered Periodic Coated Elastic Half-Space under Hertz’s Pressure, Materials Science, Vol. 47, No. 4, 527-534.
 
7.
Kulchytsky-Zhyhailo R., Bajkowski A. (2011), Elastic Half Space with Inhomogeneous Coating under the Action of Tangential Forces, Materials Science, Vol. 46, 735-746.
 
8.
Kulchytsky-Zhyhailo R., Kolodziejchyk V. (2005), Stress Field Caused by Hertz’s Pressure in non-uniform half-plane with Periodic Structure, J. Friction and Wear, Vol. 26, No. 4, 358-366.
 
9.
Kulchytsky-Zhyhailo R., Rogowski G. (2007), Stresses of Hard Coating under Sliding Contact, J. Theor. Appl. Mech., Vol. 45, 753-771.
 
10.
Kulchytsky-Zhyhailo R., Rogowski G. (2010), Stresses in hard coating due to a rigid spherical indenter on a Layered Elastic Half-Space, Tribology Int., Vol. 43, No. 9, 1592-1601.
 
11.
Liu T.J., Wang Y.S., Zhang C. (2008), Axisymmetric Frictionless Contact of Functionally Graded Materials, Archive of Appl. Mech., Vol. 78, 267-282.
 
12.
Matysiak S.J., Wozniak Cz. (1987), Micromorphic Effects in Modelling of Periodic Multilayered Elastic Composites, Int. J. Engng. Sci., Vol. 25, 549-559.
 
13.
Schwarzer N. (2000), Coating Design Due to Analytical Modelling of Mechanical Contact Problems of Multilayer Systems, Surf. Coat. Techno!., Vol. 133-134, 397-402.
 
14.
Voevodin A.A., Iarve E.V., Ragland W., Zabinski J.S., Donaldson S. (2001), Stress analyses and In-Situ Fracture Observation of Wear Protective Multilayer Coatings in Contact Loading, Surf. Coat. Technol., Vol. 148, 38-45.
 
15.
Woźniak Cz. (1987), A nonstandard method of Modelling Thermoelastic Composites, Int. J. Engng. Sci., Vol. 25, 483-499.
 
eISSN:2300-5319
ISSN:1898-4088
Journals System - logo
Scroll to top