RESEARCH PAPER
Synthesis of Pneumatic Systems in the Control of the Transport Line of Rolling Elements
1
Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology, Al. Tysiąclecia Państwa Polskiego 7,25-314 , Kielce, Poland
2
Faculty of Electrical Engineering, Automation and Computer Science, Kielce University of Technology, Al. Tysiąclecia Państwa Polskiego 7, 25-314 , Kielce, Poland
Submission date: 2022-12-06
Acceptance date: 2023-01-23
Online publication date: 2023-04-25
Publication date: 2023-06-01
Acta Mechanica et Automatica 2023;17(2):254-262
KEYWORDS
ABSTRACT
This paper presents the synthesis of a pneumatic control system for a selected configuration of the transport path for the delivery of rolling elements to spiral storage in inter-operational transport. The sequential control system sets the state of the manifolds to ensure a flow of workpieces to serve the subsequent storage. The essential module of the control system is the memory block. It is developed based on a storage filling sequence graph. The filling level of the storages can be monitored in one or two points using sensors. The rolling element displacement control sensors work together with appropriately designed systems to execute the delay of the rising and falling edge input signal. By using a two-level control of the filling level of the storages, it is possible to control the emptying status of the storages as a function of the technological time of removal of the items from the storage between the two control points. Control systems were synthesised and verified using Festo’s FluidSim computer programme.
REFERENCES (27)
1.
Mychuda Z, Mychuda L, Antoniv U, Szcześniak A. Logarithmic ADC with accumulation of charge and impulse feedback – construction, principle of operation and dynamic properties. International Journal of Electronics and Telecommunications. 2021 Dec 1;67(4):699–704. doi: 10.24425/ijet.2021.137865.
2.
Szcześniak A, Mychuda Z. Analiza prądów upływu logarytmicznego przetwornika analogowo-cyfrowego z sukcesywną aproksymacją. Przegląd Elektrotechniczny. 2012;R. 88, nr 5a:247–50.
3.
El-Maleh A. A Note on Moore Model for Sequential Circuits. 2016. https://www.researchgate.net/p....
4.
Horowitz P, Hill W. The art of electronics. Cambridge university press Cambridge; 2002.
5.
Chhillar K, Dahiya S. Design of Sequential Circuits with Timing Analysis and Considerations. Int J Eng Sci Comput. 2017;7: 808–11809.
6.
Widmer NS, Moss GL, Tocci RJ. Digital systems: principles and applications. Twelfth edition. Boston: Pearson; 2017.
7.
Gorzałczany M.B. Układy Cyfrowe—Metody Syntezy. Tom II: Układy Sekwencyjne, Układy Mikroprogramowane. Kielce, Poland: Wydawnictwo Politechniki Świętokrzyskiej; 2003.
8.
Szcześniak Z, Szcześniak A. Projektowanie układów sterowania dla automatyzacji procesów technologicznych. Kielce, Poland: Wydawnictwo Politechniki Świętokrzyskiej; 2015.
9.
Borden TR, Cox RA, Cox RA. Technician’s guide to programmable controllers. 6th ed. Clifton Park, NY: Delmar, Cengage Learning; 2013.
10.
Fernandez P, del Carpio C, Rocca E, Vinces L. An Automatic Control System Using the S7-1200 Programmable Logic Controller for the Ethanol Rectification Process. In: 2018 IEEE XXV International Conference on Electronics, Electrical Engineering and Computing (INTERCON). Lima: IEEE; 2018 p. 1–4. Available from: https://ieeexplore.ieee.org/do....
11.
Szcześniak A, Szcześniak Z. Algorithmic Method for the Design of Sequential Circuits with the Use of Logic Elements. Applied Sciences. 2021 Nov 23;11(23):11100. doi: 10.3390/app112311100.
12.
Szcześniak A, Szcześniak Z. Fast Designing Ladder Diagram of Programmable Logic Controller for a technological process. International Journal of Electronics and Telecommunications. 2022 Nov 30;68(4):709–14. doi: 10.24425/ijet. 022.141289.
13.
Phan VD, Vo CP, Dao HV, Ahn KK. Actuator Fault-Tolerant Control for an Electro-Hydraulic Actuator Using Time Delay Estimation and Feedback Linearization. IEEE Access. 2021;9:107111–23. doi: 10.1109/ACCESS.2021.3101038.
14.
Herbuś K, Ociepka P. Verification of operation of the actuator control system using the integration the B&R Automation Studio software with a virtual model of the actuator system. IOP Conf Ser: Mater Sci Eng. 2017 Aug;227:012056. doi: 10.1088/1757-899X/227/1/012056.
15.
Acuña-Bravo W, Canuto E, Agostani M, Bonadei M. Proportional electro-hydraulic valves: An Embedded Model Control solution. Control Engineering Practice. 2017 May;62:22–35. doi: 10.1016/j.conengprac.2017.01.013.
16.
Wu D, Wang X, Ma Y, Wang J, Tang M, Liu Y. Research on the dynamic characteristics of water hydraulic servo valves considering the influence of steady flow force. Flow Measurement and Instrumentation. 2021 Aug 1;80:101966. doi: 10.1016/j.flowmeasinst.2021.101966.
17.
Szcześniak A, Szcześniak Z. Mikroprocesorowe przetwarzanie sygnałów optoelektronicznego przetwornika położenia. Przegląd Elektrotechniczny. 2009;R. 85, nr 4:153–8.
18.
Vo CP, Ahn KK. High-precision Position Control of Soft Actuator Systems - The 3rd International Workshop on Active Materials and Soft Mechatronics (AMSM2018). In KAIST, Daejeon, South Korea.
19.
Zhang Y, Yue H, Li K, Cai M. Analysis of Power Matching on Energy Savings of a Pneumatic Rotary Actuator Servo-Control System. Chin J Mech Eng. 2020 Dec;33(1):30. doi: 10.1186/s10033-020-00445-3.
20.
Szcześniak A. Analiza przetwarzania sygnałów logarytmicznego przetwornika analogowo - cyfrowego z sukcesywną aproksymacją. Kielce, Poland: Wydawnictwo Politechniki Świętokrzyskiej; 2019.
21.
Mychuda Z, Zhuravel I, Mychuda L, Szcześniak A, Szcześniak Z, Yelisieieva H. Mathematical Modelling of the Influence of Parasitic Capacitances of the Components of the Logarithmic Analogue-to-Digital Converter (LADC) with a Successive Approximation on Switched Capacitors for Increasing Accuracy of Conversion. Electronics. 2022 May 6;11(9):1485. doi: 10.3390/electronics11091485.
22.
Mychuda Z, Mychuda L, Antoniv U, Szcześniak A. Logarithmic ADC with Accumulation of Charge and Impulse Feedback : Analysis and Modeling. International Journal of Electronics and Telecommunications. 2021;Vol. 67, No. 4:705–10. doi: 10.24425/ijet.2021.137866.
23.
Mychuda Z, Zhuravel I, Mychuda L, Szcześniak A, Szcześniak Z. Modelling a New Multifunctional High Accuracy Analogue-to-Digital Converter with an Increased Number of Inputs. Electronics. 2022 May 25;11(11):1677. doi: 10.3390/electronics11111677.
26.
Kisielewski P, Sobota Ł. Zastosowanie teorii masowej obsługi do modelowania systemów transportowych. Autobusy: technika, eksploatacja, systemy transportowe. 2016;17(6):600–4.
27.
Ficoń K. Zastosowanie teorii masowej obsługi do analizy systemu zabezpieczenia logistycznego sytuacji kryzysowych. SLW. 2017 Dec 29;47(2):59–79.
| eISSN: | 2300-5319 |
| ISSN: | 1898-4088 |
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
