RESEARCH PAPER
THIN-WALLED EPOXY-GLASS FIBRE BEAMS SUBJECTED TO PURE BENDING
1
Mechanical Engineering Faculty, Department of Strength of Materials, Lodz University of Technology, ul. Stefanowskiego 1/15, 90-924 Lódź, Poland
Online publication date: 2013-12-31
Publication date: 2013-06-01
Acta Mechanica et Automatica 2013;7(2):83-88
KEYWORDS
ABSTRACT
Buckling and postbuckling behaviour of thin-walled channel section beam made of epoxy-glass composite have been considered. The beams under analysis was subjected to pure bending. The main aim was check the influence of ply arrangement on buckling load and postbuckling behaviour and validate the authors analytical-numerical method by commercial finite element method software. Mentioned analytical-numerical method has been developed for more than 25 years in Department of Strength of Materials. This method uses asymptotic Koiter theory for conservative systems in the second order approximation modified by Byskov and Hutchinson. Additionally, using the finite element method software the influence of ply arrangement on failure load were checked.
REFERENCES (31)
3.
Bernoulli J., Euler L. (1910), Abhandlungen uber das Gleichegewicht und die Schwingungen der Ebenen Elastischen Kurven, Wilhelm Engelmann, 175, Leipzig.
4.
Brunelle E.J., Oyibo G.A. (1983), Generic buckling curves for specially orthotropic rectangular plates, AIAA 21, 8, 1150-115.
5.
Byskov E., Hutchinson J. W. (1977), Mode interaction in axially stiffened cylindrical shells, AIAA 15(7), 941-948.
6.
Chailleux A., Hans Y., Verchery G. (1975), Experimental study of the buckling of laminated composite columns and plates, Int. J. Mechanical Science 17, 489-498.
7.
Chandra R., Raju B. (1973), Postbuckling analysis for rectangular orthotropic plates, Int. J of Mechanical Science 16, 81-97.
8.
Dębski H., Kubiak T., Teter A. (2013), Buckling and postbuckling behaviour of thin-walled composite channel section column, Composite Structures 100, 195-204.
9.
Fraser Jr., H.R., Miller R.E. (1970), Bifurcation type of buckling of generally orthotropic clamped plates, AIAA 8, 4, 707-712.
10.
Gupta R.K., Rao K.P. (1985), Instability of laminated composite thinwalled open-section beams, Composite Materials 4, 299-313.
11.
Koiter W.T. (1976), General theory of mode interaction in stiffened plate and shell structures, WTHD, Report 590, Delf.
12.
Kołakowski Z., Kowal-Michalska K. (eds), (1999), Selected problems of instabilities in composite structures A series of monographes, Technical University of Lodz Press.
13.
Kolakowski Z., Kubiak T. (2005), Load-carrying capacity of thinwalled composite structures, Composite Structures 67, 417-426.
14.
Kolakowski Z., Kowal-Michalska K. (eds), (2012), Static, dynamic and stability of structures, Vol. 2, Statics, dynamics and stability of structural elements and systems, A series of monographs, Technical University of Lodz Press, Lodz.
15.
Kolakowski Z., Mania R.J. (2013), Semi analytical method versus the FEM for analysis of the local post-buckling of thin-walled composite structure, Composite Structures 97, 99-106.
16.
Kubiak T. (2001), Postbuckling behavior of thin-walled girders with orthotropy varying widthwise, Int. J. Solid and Structures 38, 28-29, 4839-4856.
18.
Libove C., (1983), Buckle pattern of biaxially compressed simply supported orthotropic plates, Jnt. of Comp. Materials 17, 45-48.
19.
Mandell J.M. (1968), An experimental study of the postbuckling of anisotropic plates, M.S. thesis, Case Western Reserve University.
20.
March H. (1942), Buckling of flat plywood plates in compression, shear or combined compression and shear, Forest Products Laboratory, Rep. 1316.
21.
Massey C. (1971), The elastic buckling of orthotropic rectangular plates, Civ. Eng. Trans. CE13, 1, 63-65.
22.
Noor A.K. (1975), Stability of multilayered composite plates, Fibre Science and Technology 8, 81-89.
23.
Prahakara M.K. Chia C.Y. (1973), Postbuckling behaviour of rectangular orthotropic plates, Jnl. Mech. Eng. Sci. 17, 25-33.
24.
Reissner. E., Stavsky. Y. (1961), Bending and stretching of certain types of heterogeneous aelotropic elastic plates, Trans ASME Jnl. of Appl. Mech. 9, 402-408.
26.
Smith R.C.T. (1944), The buckling of flat plywood plate in compression, Australian Council for Aeonautics Rep. 12.
27.
Thielemann W. (1950), Contributions to the problem of buckling of orthotropic plates with special reference to plywood, NACA TM 1263.
29.
Ting T.K. Surdenans J. (1987), Buckling of rectangular orthotropic plates under biaxial loading, Jnl of Comp. Materials, 21, 124-128.
30.
Vinson J.R. Chou T.W. (1975), Composite Materials and their use in structures, Applied Science Publisher Ltd.
31.
Volmir S.A. (1967), Stability of Deformation Systems, Science, Moscow /in Russian/.
| eISSN: | 2300-5319 |
| ISSN: | 1898-4088 |
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
