In this article, the attention is paid to the HVOF (High Velocity Oxygen Fuel) thermal spraying method by which the progressive coatings are applied on basic material C15E (STN 412020). These coatings are based on C-17CO, WC-CO-Cr and Cr3C2-25NiCr. There was made determination of the chemical composition of the coatings and assessment of coatings quality - adhesion, microhardness, porosity and wear resistance at room temperature (21°C) and also at operational elevated temperature (900°C). Results of adhesive wear showed high quality of all evaluated coatings and their suitability to extreme tribological conditions.
REFERENCES(14)
1.
Bolelli G. (2009), HVOF-sprayedWC-CoCr coatings on Al alloy: Effect of the coating thickness on the tribological properties, Wear, Vol. 267, 944-953.
Bolelli G. et al. (2007), Microstructural and tribological comparison of HVOF-sprayed and post-treated M-Mo-Cr-Si (M=Co, Ni) alloy coatings, Wear, Vol. 263, 1397-1416.
Bolelli G., Lusvarghi L., Barletta M. (2009), HVOF-sprayedWC- CoCr coatings on Al alloy: Effect of the coating thickness on the tribological properties, Wear, Vol. 267, 944-953.
González-Hermosilla W. A. et al. (2010), Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC-10Co-4Cr cermet, deposited by HVOF thermal spray, Materials Science and Engineering A, Vol. 527, 6551-6561.
Hadad M. et al. (2008), Adhesion evaluation of multilayered based WC-Co-Cr thermally sprayed coatings, Surface and Coatings Technology, Vol. 202, 4399-4405.
Lee C.W., Han J.H., Yoon J., Shin M.C., Kwun S.I. (2010), A study on powder mixing for high fracture toughness and wear resistance of WC-Co-Cr coatings sprayed by HVOF, Surface and Coatings Technology, Vol. 204, 2223-2229.
Maiti A.K., Mukhopadhyay N., Raman R. (2007), Effect of adding WC powder to the feedstock of WC-Co-Cr based HVOF coating and its impact on erosion and abrasion resistance, Surface and Coatings Technology, Vol. 201, 7781-7788.
Sahraoui T., Guessasma S., Fenineche N. E., Montavon G., Coddet C. (2004), Friction and wear behaviour prediction of HVOF coatings and electroplated hard chromium using neural computation, Materials Letters, Vol. 58, 654-660.
Sidhu H. S., Sidhu B. S., Prakash S. (2006), Mechanical and microstructural properties of HVOF sprayed WC-Co and Cr3C2-NiCr coatings on the boiler tube steels using LPG as the fuel gas, Journal of Materials Processing Technology, Vol. 171, 77-82.
Thakur L., Arora N., Jayaganthan R., Sood R. (2011), An investigation on erosion behavior of HVOF sprayed WC-CoCr coatings, Applied Surface Science, Vol. 258 1225-1234.
Venkateswarlu K. et al. (2009), Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques, Wear, Vol. 266, 996-1002.
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.