RESEARCH PAPER
Electronic Speckle Pattern Interferometry for Vibrational Analysis of Cutting Tools
1
Faculty of Mechanical Engineering, Department of Materials and Production Engineering, Bialystok University of Technology, Wiejska 45C, 15-351 Bialystok, Poland
2
Faculty of Mechanical Engineering, Department of Mechanics and Applied Computer Science, Bialystok University of Technology, Wiejska 45C, 15-351 Bialystok, Poland
Submission date: 2017-10-13
Acceptance date: 2018-06-13
Online publication date: 2018-07-17
Publication date: 2018-06-01
Acta Mechanica et Automatica 2018;12(2):135-140
KEYWORDS
ABSTRACT
A Michelson interferometer based ESPI system for static and vibration out of plane displacement measurements is presented. The aim of the article is to demonstrate the usability of ESPI non-contact measurement method in the field of machining. The correlation fringe patterns were visualized using custom software. The accuracy of ESPI interferometer was verified by the comparison with measurement results collected using industrial XL-80 laser system. The efficacy in vibration analysis was tested by studying the mode shapes and resonant frequencies of the transverse vibrations of square plates. The measurement methodology was used to determine natural frequencies and the shapes of vibrational modes of NFTe 100x1.2/64-II circular slitting saw. As a result the values of rotational speed that should be avoided during machining were determined.
REFERENCES (17)
1.
Augulis L., Tamulevicius S., Augulis R., Bonneville J., Goudeau P., Templier C. (2004), Electronic speckle pattern interferometry for mechanical testing of thin film, Optics and Lasers in Engineering, 42, 1–8.
2.
Beeck M.A., Hentschel W. (2000), Laser metrology - a diagnostic tool in automotive development processes, Optics and Lasers in Engineering, 34(2), 101–120.
3.
Blevins R.D. (2016), Formulas for Dynamics, Acoustics and Vibration, John Wiley & Sons, Ltd.
4.
Chi-Hung H., Yu-Chih L., Chien-Ching M. (2004) Theoretical analysis and experimental measurement for resonant vibration of piezoceramic circular plates, IEEE Transactions On Ultrasonics, Ferroelectrics, And Frequency Control, 51(1), 12-24.
5.
Foitzik A.H., Kaese W., Vogt T., Sommerer M., Arkhipov S. (2003), Static and Dynamic Characterization of MEMS via ESPI, International Journal Of Computational Engineering Science, 4(3), 467–470.
6.
Fu G., Moosa A.G. (2002), An Optical Approach to Structural Displacement Measurement and Its Application, Journal of Engineering Mechanics, 128, 511–520.
7.
Halama R., Hornacek L., Pecenka L., Krejsa M., Smach J. (2016), 3-D ESPI Measurements Applied to Selected Engineering Problems, Applied Mechanics and Materials, 827, 65–68.
8.
Hild F., Roux S. (2006), Digital Image Correlation: from Displacement Measurement to Identification of Elastic Properties – a review, Strain, 42, 69–80.
9.
Qin J., Gao Z., Wang X., Yang S. (2016), Three-Dimensional Continuous Displacement Measurement with Temporal Speckle Pattern Interferometry, Sensors, 16(12), 2020.
10.
Richardson M.O.W., Zhang Z.Y., Wisheart M., Tyrer J.R. Petzing J. (1998), ESPI non-destructive testing of GRP composite materials containing impact damage, Composites Part A, 29A, 721–729.
11.
Rothberg S.J., Bell J.R. (2004), On the application of laser vibrometry to translational and rotational vibration measurements on rotating shafts, Measurement, 35, 201–210.
12.
Tatar K., Gren P. (2008), Measurement of milling tool vibrations during cutting using laser vibrometry, International Journal of Machine Tools & Manufacture, 48, 380–387.
13.
Van der Auweraer H., Steinbichler H., Vanlanduit S., Haberstok C., Freymann R., Storer D., Linet V. (2002), Application of stroboscopic and pulsed-laser electronic speckle pattern interferometry (ESPI) to modal analysis problems, Measurements Science and Technology, 13, 451–463.
14.
Yang L., Xie X., Zhu L., Wu S., Wang Y. (2014), Review of Electronic Speckle Pattern Interferometry (ESPI) for Three Dimensional Displacement Measurement, Chinese Journal Of Mechanical Engineering, 27(1), 1–13.
| eISSN: | 2300-5319 |
| ISSN: | 1898-4088 |
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
