RESEARCH PAPER
Linear Analysis of Thin-Walled Composite Profiles Weakened by Holes
1
Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland
Submission date: 2022-12-27
Acceptance date: 2023-06-07
Online publication date: 2023-12-30
Publication date: 2023-12-01
Acta Mechanica et Automatica 2023;17(4):550-557
KEYWORDS
ABSTRACT
The paper presents the results of the numerical analysis of the stability of C-section profiles together with the determination of the influence of the geometrical parameters of the holes and their arrangement on the strength properties of the profile, made of multilayer composite materials in a symmetrical arrangement of layers, which is deformed under the influence of the compressive force. Numerical calculations were carried out in the linear range (solution of the eigenvalue problem - critical state) using the finite element method (FEM) using the ABAQUS calculation package. Based on the obtained results, it was possible to determine the influence of the type and number of holes, their arrangement and geometric dimensions on the values of critical loads as well as the buckling modes of the profiles.
REFERENCES (32)
1.
Falkowicz K, Debski H. The work of a compressed, composite plate in asymmetrical arrangement of layers. W Depok, Indonesia; 2019. 020005. http://aip.scitation.org/doi/a....
2.
Falkowicz K, Ferdynus M, Rozylo P. Experimental and numerical analysis of stability and failure of compressed composite plates. Composite Structures. 2021;263:113657.
3.
Falkowicz K, Debski H, Teter A. Design solutions for improving the lowest buckling loads of a thin laminate plate with notch. W Lublin, Poland; 2018. s. 080004. http://aip.scitation.org/doi/a....
4.
Falkowicz K, Szklarek K. Analytical method for projecting the buckling form of composite palates with a cut-out. IOP Conf Ser: Mater Sci Eng. 2019;710(1):012021.
5.
Falkowicz K. Experimental and numerical failure analysis of thin-walled composite plates using pro-gressive failure analysis. Composite Structures. 2023;305:116474.
6.
Falkowicz K, Samborski S, Valvo PS. Effects of Elastic Couplings in a Compressed Plate Element with Cut-Out. Materials. 2022; 15(21):7752.
7.
Kopecki T, Mazurek P, Lis T. Experimental and Numerical Analysis of a Composite Thin-Walled Cylindrical Structures with Different Variants of Stiffeners, Subjected to Torsion. Materials. 2019; 12(19):3230.
8.
Singer J, Arbocz J, Weller T. Buckling experiments: experimental methods in buckling of thin-walled structures. Chichester; New York: Wiley; 1998.
9.
Banat D, Mania RJ. Progressive failure analysis of thin-walled Fibre Metal Laminate columns subject-ed to axial compression. Thin-Walled Structures. 2018;122:52–63.
10.
Banat D, Mania RJ. Failure assessment of thin-walled FML profiles during buckling and post-buckling response. Composites Part B: Engineering. 2017;112:278–89.
11.
Debski H, Rozylo P, Gliszczynski A, Kubiak T. Numerical models for buckling, postbuckling and failure analysis of pre-damaged thin-walled compo-site struts subjected to uniform compression. Thin-Walled Structures. 2019;139:53–65.
12.
Rozylo P, Falkowicz K, Wysmulski P, Debski H, Pasnik J, Kral J. Experimental-Numerical Failure Analysis of Thin-Walled Composite Columns Using Advanced Damage Models. Materials. 2021; 14(6):1506.
13.
Debski H, Teter A, Kubiak T. Numerical and experimental studies of compressed composite columns with complex open cross-sections. Compo-site Structures. 2014;118:28–36.
14.
Rozylo P, Debski H, Wysmulski P, Falkowicz K. Numerical and experimental failure analysis of thin-walled composite columns with a top-hat cross section under axial compression. Composite Structures. 2018;204:207–16.
15.
Vannucci P. Anisotropic Elasticity [Internet]. Sin-gapore: Springer Singapore; 2018. (Lecture Notes in Applied and Computational Mechanics; t. 85). http://link.springer.com/10.10....
16.
Ribeiro ML, Vandepitte D, Tita V. Damage Model and Progressive Failure Analyses for Filament Wound Composite Laminates. Appl Compos Ma-ter. 2013;20(5):975–92.
17.
Jonak J, Karpiński R, Wójcik A, Siegmund M. The Influence of the Physical-Mechanical Parameters of Rock on the Extent of the Initial Failure Zone un-der the Action of an Undercut Anchor. Materials. 2021;14(8):1841.
18.
Jonak J, Karpiński R, Siegmund M, Wójcik A, Jonak K. Analysis of the Rock Failure Cone Size Relative to the Group Effect from a Triangular Anchorage System. Materials. 2020;13(20):4657.
19.
Kowal M, Rozylo P. Effect of bond end shape on CFRP/steel joint strength. Composite Structures. 2022;284:115186.
20.
Bulzak T, Winiarski G, Wójcik Ł, Szala M. Application of Numerical Simulation and Physical Mod-eling for Verifying a Cold Forging Process for Rotary Sleeves. J of Materi Eng and Perform. 2022; 31(3):2267–80.
21.
Rogala M, Ferdynus M, Gawdzińska K, Kochmański P. The Influence of Different Length Aluminum Foam Filling on Mechanical Behavior of a Square Thin-Walled Column. Materials. 2021;14(13):3630.
22.
Ferdynus M, Szklarek K, Kotełko M. Crashworthiness performance of thin-walled hollow and foam-filled prismatic frusta, Part 2: Experimental study. Thin-Walled Structures. 2022;181:110070.
23.
Paśnik J, Samborski S, Rzeczkowski J. Application of the CZM Technique to Delamination Analysis of Coupled Laminate Beams. IOP Conf Ser: Mater Sci Eng. 26 październik 2018;416:012075.
24.
Falkowicz K. Numerical Investigations of Perforated CFRP Z-Cross-Section Profiles, under Axial Compression. Materials. 2022;15(19): 6874.
25.
Falkowicz K. Numerical analysis of behaviour of compressed thin-walled Z-profiles weakened by holes. Kulisz M, Szala M, Badurowicz M, Cel W, Chmielewska M, Czyż Z, i in., redaktorzy. MATEC Web Conf. 2019;252:07010.
26.
Falkowicz K. Stability Analysis of Thin-Walled Perforated Composite Columns Using Finite Element Method. Materials. 2022;15(24):8919.
27.
Falkowicz K. Numerical Buckling Analysis of Thin-Walled Channel-Section Composite Profiles Weakened by Cut-Outs. Adv Sci Technol Res J. 2022;16(6):88–96.
28.
Debski H, Rozylo P, Wysmulski P, Falkowicz K, Ferdynus M. Experimental study on the effect of eccentric compressive load on the stability and load-carrying capacity of thin-walled composite profiles. Composites Part B: Engineering. 2021;226:109346.
29.
Wysmulski P, Debski H, Falkowicz K. Sensitivity of Compressed Composite Channel Columns to Eccentric Loading. Materials. 2022;15(19):6938.
30.
Falkowicz K, Valvo P. Influence of Composite Lay-Up on the Stability of Channel-Section Pro-files Weakened by Cut-Outs – A Numerical Investigation. Adv Sci Technol Res J. 2023;17(1):108–15.
31.
Kubiak T. Static and Dynamic Buckling of Thin-Walled Plate Structures [Internet]. Heidelberg: Springer International Publishing; 2013. http://link.springer.com/10.10....
32.
Wysmulski P. Non-linear analysis of the postbuckling behaviour of eccentrically compressed compo-site channel-section columns. Composite Structures. 2023;305:116446.
Share
RELATED ARTICLE
| eISSN: | 2300-5319 |
| ISSN: | 1898-4088 |
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
