RESEARCH PAPER
Antiplane Deformation of a Bimaterial Containing an Interfacial Crack with the Account of Friction I. Single Loading
1
Faculty of Mechanical Engineering, Bialystok University of Technology, 45C, Wiejska Str., 15-351 Bialystok, Poland
2
Ukrainian Academy of Printing, Pidgolosko Str. 19, 79020 L’viv, Ukraine
3
Lutsk National Technical University, Lvivska Str. 75, 43018 Lutsk, Ukraine
Submission date: 2015-03-03
Acceptance date: 2015-07-23
Online publication date: 2015-08-14
Publication date: 2015-06-01
Acta Mechanica et Automatica 2015;9(2):115-121
KEYWORDS
FrictionInterfacial CrackEnergy DissipationStress Intensity FactorAntiplane DeformationLongitudinal ShearBimaterialDiscontinuity Functions
ABSTRACT
The paper presents the exact analytic solution to the antiplane problem for a non-homogeneous bimaterial medium containing closed interfacial cracks, which faces can move relatively to each other with dry friction. The medium is subjected to the action of normal and arbitrary single loading in a longitudinal direction. Based on the discontinuity function method the problem is reduced to the solution of the system of singular integral-differential equations for stress and displacement discontinuities at the possible slippage zones. Influence of loading parameters and the effects of friction on the sizes of these zones is analyzed. The stress intensity factors, stress and displacement discontinuities, energy dissipation are determined for several characteristic types of external loading.
REFERENCES (34)
1.
Antipov Yu.A. (1995), The crack in the line section of elastic media in the presence of dry friction (in russian), Prikl. matematika i mehanika, 59, Vyp. 2, 290-306.
2.
Aravas N., Sharma S.M. (1991), An elastoplastic analysis of the interface crack with contact zones, J. Mech. Phys. Solids, 39, 311-344.
3.
Arhipenko K.M., Kriviy O.F. (2008), Interfacial beam at different types of contact interaction with inhomogeneous anisotropic plane (in ukrainian), Mashinoznavstvo, 8, No 3 (129), 16-21.
4.
Bogdanovich P.N., Tkachuk D.V. (2009), Thermal and thermo-mechanical effects in sliding contact (in russian), Treniye i iznos, 30, No 3, 214-229.
5.
Brussat T.R., Westmann R.A. (1974), Interfacial slip around rigid fiber inclusion, Journal of Composite Materials, 8, No. 4, 364-377.
6.
Cherepanov G.P. (1966), On the development of cracks in compressed bodies (in russian), Prikladnaya matematika i mehanika, 30, No 1, 82-93.
8.
Comninou M., Schmueser D. and Dundurs J. (1980), Frictional slip between a layer and a substrate caused by a normal load, Int. J. Engn. Sci., 18, 131-137.
9.
Datsyshyn O.P., Kadyra V.M. (2006), A fracture mechanics approach to prediction of pitting under fretting fatigue conditions, Int. J. of Fatigue, 28, No 4, 375-385.
10.
Evtushenko A.A., Sulim G.T. (1981), Stress concentration near a cavity filled with a liquid, Soviet Materials Science, 16, No. 6, 546-549.
11.
Goryacheva I.G. (2001), Mechanics of frictional interaction (in russian), Moskva, Nauka.
12.
Goryacheva I.G., Rajeev P.T. and Farris T.N. (2001), Wear in partial slip contact, J. Tribology, 123, 848-856.
13.
Herrmann K.P., Loboda V.V. (1999), On interface crack models with contact zones situated in an anisotropic biomaterial, Archive of App. Mech., 69, 317-335.
14.
Hills D.A, Nowell D. and Sackfield A. (1993), Mechanics of elastic contact, Butterworth-Heinemann, Oxford.
16.
Kharun I.V., Loboda V.V. (2003), A set of interface cracks with contact zones in combined tension-shear field, ActaMechanica, 166, 43-56.
17.
Kit G.S., Martynyak R.M. and Machishyn I.M. (2003), The effect of fluid in the contact gap on the stress state of conjugate bodies, Ibid, 39, No 3, 292-299.
18.
Kundrat M.M., Sulym H.T. (2003), Prefracture zones in the composition of high-modulus elastic inclusion with symmetric and antisymmetric load (in ukrainian), Matematychni problem mehaniky neodnoridnyh struktur, Lviv, 322-324.
19.
Loboda V.V., Kharun I.V. (2001), Plane Problem of a Crack on the Interface of Orthotropic Plates with Friction of Crack Lips, Materials Science, 37, Issue 5, 735-745.
20.
Malanchuk N. et al. (2007), Local sliding of bodies surface inhomogeneities caused by the actions of power and heat loads (in ukrainian), Mashinoznavstvo, No 7, 15-20.
21.
Martynyak R.M., Kryshtafovych A. (2000), Friction contact of two elastic half-planes with local recesses in boundary, J. Friction and Wear, 21, No 4, 6-15.
22.
Martynyak R.M. et al. (2005), Elastic interaction of two half-planes shear in the local area borders on contact gap (in ukrainian), Mat. Metody ta fiz.-meh. polya, 48, No 3, 101-109.
23.
Ostryk V.I., Ulitko A.F. (2006), Wiener-Hopf method to contact problems of theory of elasticity (in russian), Kiev, Naukova dumka.
24.
Panasyuk V.V. et al. (1976), Distribution tense neighborhood of cracks in the plates and shells (in russian), Kiev, Naukova dumka.
25.
Pasternak Ya.M., Sulym H.T., Piskozub L.G. (2010), Models of thin inclusion with the account of imperfect contact with the medium (in russian), Proc. of VI International symposium on Tribo-Fatigue MSTF 2010 (Minsk, 25 oct. - 1 nov. 2010) in 2 parts, part 2., Minsk, BGU, 399-404.
26.
Piskozub J.Z., Sulim G.T. (2008), Thermoelastic equilibrium of piecewise homogeneous solids with thin inclusions, Journal of Engineering Mathematics. Special Issue Thermomechanics, 61, 315-337.
27.
Popov G.Ya. (1966), Plane contact problem of the theory of elasticity with the forces of adhesion and friction (in russian), Prikladnaya matematika i mehanika, 30, No 3, 551-563.
28.
Pyriev S.Yu. et al. (2012), Thermomechanical wear during quasi-stationary frictional heating (in russian), Treniye i iznos, 33, No 5, 435-443.
29.
Schmueser D., Comninou M., Dundurs J. (1980), Separation and slip between a layer and substrate caused by a tensile load, Ibid, 18, 1149-1155.
30.
Sekine H.(1982), Mechanics of debonding along the surfaces of dispersed flat inclusions in composite materials (A model of debonding along the surface of a flat inclusion), Trans. ASME. Journal of Applied Mechanics, 48A, No. 11 (435), 1415-1420.
31.
Sulym H.T. (2007), Fundamentals of the mathematical theory of thermoelastic equilibrium of deformable bodies with thin inclusions (in ukrainian), Lviv, Doslidno-vydavnychyy tsentr NTSh.
32.
Sulym H.T., Piskozub Y.Z. (2004), Conditions of contact interaction (review) (in ukrainian), Mat. metody i fiz.-meh. polya, 47, No 3, 110-125.
33.
Ulitko A.F., Ostrik V.I. (2002), Interfacial crack subjected to frictional contact (in ukrainian), Visnyk Kyiv. un-tu., Ser. fiz.-mat. nauky, 2, 133-141.
34.
Weertman J., Lin I.-H., Thomson R. (1983), Double slip plane crack model, Acta met., 31, No 4, 473-482.
Share
RELATED ARTICLE
| eISSN: | 2300-5319 |
| ISSN: | 1898-4088 |
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
