Digital Image Correlation Technique as a Tool for Kinematics Assessment of Structural Components

The paper reports the results of tests carried out for kinematic properties determination of components under cyclic loading. DIC system called 5M PONTOS was employed to follow variations of displacement versus time. It was conducted by the use of markers stuck on selected sections of components tested. The results are presented in 2D and 3D coordinate systems expressing behaviour of such elements as: mechanical coupling device, boat frame and car engine. These data enabled to capture weak and strong sections of the component examined at various loading conditions.

REFERENCES (14)

Baqersada J., Carra J., Lundstroma T., Niezrecki Ch., Avitabilea P., Slattery M., (2012), Dynamic characteristics of a wind turbine blade using 3D digital image correlation, Health Monitoring of Structural and Biological Systems 2012, edited by Tribikram Kundu, Proc. of SPIE, 8348.

Google Scholar

Berger H., Klein M., Lambert F., Levadoux B., (2010), Optical Vibration Measurement and Frequency Response Analysis on Large Structures under Multiple Excitation Load Conditions, Proceedings of ISMA2010 including USD2010, 1693–1702.

Google Scholar

Bornert M., Brémand F., Doumalin P., Dupré J.-C., Fazzini M., Grédiac M., Hild F., Mistou S., Molimard J., Orteu J.-J., Robert L., Surrel Y., Vacher P., Wattrisse B., (2009), Assessment of Digital Image Correlation Measurement Errors: Methodology and Results, Experimental Mechanics, 49, 353–370.

Google Scholar

Brinkmann Ch., Haberland J., Böttinger S., Erne O., Sanow G., (2007), Optical 3D Measuring System for Investigating Tyre Deformations, Tractor Technology, 62(5), 326–327.

Google Scholar

Chu T.C., Ranson W.F., Sutton M.A., Peters W.H., (1985), Applications of digital-image-correlation techniques to experimental mechanics, Experimental Mechanics, 232–244.

Google Scholar

Creager C., Johnson K., Plant M., Moreland S., Skonieczny K., (2015), Push–pull locomotion for vehicle extrication, Journal of Terramechanics, 57, 71–80.

Google Scholar

Gower M.R., Shaw R.M., (2006), Towards a planar cruciform specimen for biaxial characterization of polymer matrix composites, Applied Mechanics and Materials, 24–25, 115–120.

Google Scholar

Kamaya M., Kawakubo M., (2011), A procedure for determining the true stress–strain curve over a large range of strains using digital image correlation and finite element analysis, Mechanics of Materials, 43, 243–253.

Google Scholar

Long X., Fu S., Qi Z., Yang X., Yu Q., (2012), Digital image correlation using stochastic parallel-gradient-descent algorithm, Experimental Mechanics, DOI 10.1007/s11340-012-9667-4.

Google Scholar

10.

Szymczak T., Kowalewski Z.L., Brodecki A., (2016a), Determination of artificial defects in material under monotonic tension by the use of FEM and DIC methods, Materials Today: Proceedings, 3, 1171–1176.

Google Scholar

11.

Szymczak T., Kowalewski Z.L., Brodecki A., (2016b), Digital Image Correlation method for investigations of materials and engineering structures, Technical Suspervision (Dozór Techniczny), 4, 22–3 (in Polish).

Google Scholar

12.

Toussaint F., Tabourot I., Vacher P., (2008), Experimental study with a Digital Image Correlation (DIC) method and numerical simulation of an anisotropic elastic-plastic commercially pure titanium, Archives of Civil and Mechanical Engineering, VIII, 3, 131–143.

Google Scholar

13.

Regulation No 55 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of mechanical coupling components of combinations of vehicles, 28.08.2010.

Google Scholar

14.

www.gom.com.

Google Scholar

Submit your paper

Volumes and Issues

Send by email

Antiplane Deformation Of A Bimaterial Containing An Interfacial Crack With The Account Of Friction 2. Repeating And Cyclic Loading

Ratcheting Simulation in a Titanium-Steel Bimetallic Plate Based on the Chaboche Hardening Model

Indexes

Keywords index

Topics index

Authors index

eISSN:	2300-5319
ISSN:	1898-4088