RESEARCH PAPER
GPS Application in the Design of Gearboxes
1
Faculty of Mechanical Engineering, Department of Structural and Transportation Engineering, Technical University of Košice, Letná 1/9, 042 00 , Košice, Slovak Republic
Submission date: 2022-06-27
Acceptance date: 2022-07-26
Online publication date: 2022-10-14
Publication date: 2022-12-01
Acta Mechanica et Automatica 2022;16(4):309-315
KEYWORDS
ABSTRACT
The integrated geometrical product specification (GPS) system for workpiece geometry specification and verification is an improved engineering tool for product development and production. The goal of the GPS system is to provide tools for cost-effective management of variability in products and processes. This can be achieved by using a more precise way of expressing the functional requirements of the workpiece, complete and well-defined specifications and integrated verification approaches. The intended function of the product is ensured by controlling the geometry and material properties of the workpiece parts, which make up the product. GPS is a language just for checking geometry, and further development is based on computational mathematics and correct, consistent logic using general sets of rules that can be applied to all types of specifications. This article deals with the application of GPS rules in the design of gearboxes.
REFERENCES (14)
1.
Lin W, Chen N. Research on New Geometrical Product Specifications (GPS)-Geometrical Tolerancing. 5th International Conference on Mechanical, Control and Computer Engineering (ICMCCE). 2020: 2106-2109. https://doi.org/10.1109/ICMCCE....
2.
Cai N, Answer N, Scott P. J, Qiao L, Jiang X. A new partitioning process for geometrical product specifications and verification. Precision Engineering. 2020;62:282-295. https://doi.org/10.1016/j.prec....
3.
Moravec J. Extrusion in Hydroenvironment in laboratory Conditions, XXI. AEaNMiFMaE-2018,MATEC Web of Conference 168, 07003, 2018. https://doi.org/10.1051/matecc....
4.
Humienny Z. State of art in standardization in the geometrical product specification area a decade later. CIRP Journal of Manufacturing Science and Technology. 2021;33:42–51. https://doi.org/10.1016/j.cirp....
5.
Figlus T, Koziol M, Kuczynski L. The Effect of Selected Operational Factors on the Vibroactivity of Upper Gearbox Housings Made of Composite Materials. Sensors. 2019; 19(19), 4240:1-17. https://doi.org/10.3390/s19194....
6.
Sinčák PJ, Virgala I, Kelemen M, Prada E, Bobovský Z, Kot T. Chimney Sweeping Robot Based on a Pneumatic Actuator. Applied Sciences. 2021; 11(11):4872. https://doi.org/10.3390/app111....
7.
Qi Q, Pagani L, Jiang X, Scott P. J. Enabling metrology-oriented specification of geometrical variability – A categorical approach. Advanced Engineering Informatics. 2019;39:347–358. https://doi.org/10.1016/j.aei.....
8.
Cheng Y, Wang Z, Chen X, Li Y, Li H, Wang H. Evaluation and Optimization of Task-oriented Measurement Uncertainty for Coordinate Measuring Machines Based on Geometrical Product Specifications. Applied Sciences. 2019;9(1):1-6. https://doi.org/10.3390/app901....
9.
Can E, Bozca M. Optimisation of gear geometrical parameters using KISSsoft. Machines, Technologies, Materials. 2019;13(1),7-10.
10.
Sapietková A. Simplified computation methodology for contact forces on tapered rolling bearing with flexible parts. Scientific Journal of Silesian University of Technology. Series Transport. 2018;99:177–182. https://doi.org/10.20858/sjsut....
11.
Moravec J, Bury P, Černobila F. Investigation of Forging Metal Specimens of Different Relative Reductions Using Ultrasonic Waves. Materials. 2021;14(9), 2406. https://doi.org/10.3390/ma1409....
12.
Humienny Z. Can ISO GPS and ASME Tolerancing Systems Define the Same Functional Requirements? Applied Sciences. 2021;11, 8269. https://doi.org/10.3390/app111....
13.
Wejrzanowski T, Ibrahim SH, Skibinski J, Cwieka K, Kurzydlowski KJ.: Appropriate models for simulating open porous materials. Image Analysis & Stereology. 2017;36:105-110. https://doi.org/10.556/ias.164....
14.
Yu Y, Wang Q, Ni J, Xu D, Li J. A GPS-based force rendering model for virtual assembly of mechanical parts. The International Journal of Advanced Manufacturing Technology. 2022;118,465–477. https://doi.org/10.1007/s00170....
| eISSN: | 2300-5319 |
| ISSN: | 1898-4088 |
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
