RESEARCH PAPER
Passive Safety of a Buggy-Type Car in the Aspect of a Dynamic Analysis of the Frame
1
Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics, Lublin University of Technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland
Submission date: 2018-10-04
Acceptance date: 2019-04-30
Online publication date: 2019-07-25
Publication date: 2019-06-01
Acta Mechanica et Automatica 2019;13(2):75-79
KEYWORDS
ABSTRACT
This article presents passive safety issues of a buggy-type car. The issue has been presented in the context of the dynamic impact analysis of the aluminium frame of the vehicle into a rigid wall. The study was conducted using the finite element method in the Abaqus® software. With regard to numerical calculations, a dynamic impact simulation was performed, which defined the critical areas of the structure. Numerical analysis allowed to obtain both the state of the strain of the frame structure and the characteristics of the construction work during the impact. The results of the research provide high-quality prepared FEM model.
REFERENCES (20)
1.
Alavi A., Khodabakhsh H. (2015), The effect of radial distance of concentric thin-walled tubes on their energy absorption capability under axial dynamic and quasi-static loading, Thin-Walled Structures, 93, 188-197.
4.
Deng X., Liu W., Lin Z. (2018), Experimental and theoretical study on crashworthiness of star-shaped tubes under axial compression, Thin-Walled Structures, 130, 321–331.
5.
Ferdynus M. (2013), An energy absorber in the form of a thin-walled column with square cross-section and dimples, Eksploatacja i Niezawodnosc – Maintenance and Reliability, 15 (3), 253–258.
6.
Ferdynus M., Kotelko M., Kral J. (2018), Energy absorption capability numerical analysis of thin-walled prismatic tubes with corner dents under axial impact, Eksploatacja i Niezawodnosc – Maintenance and Reliability, 20, 252-259.
7.
Guangjun G., Weiyuan G., Jian L., Haipeng D., Xiang Z., Wei C. (2017), Experimental investigation of an active–passive integration energy absorber for railway vehicles, Thin-Walled Structures, 117, 89-97.
8.
Gui C., Bai J., Zuo W. (2018), Simplified crashworthiness method of automotive frame for conceptual design, Thin-Walled Structures, 131, 324–335.
10.
Lonkwic P., Rozylo P., Debski H. (2015), Numerical and experimental analysis of the progressive gear body with the use of finite-element method, Eksploatacja i Niezawodnosc – Maintenance and Reliability, 17, 544-550.
11.
Milanowicz M., Budziszewski P., Kedzior K. (2018), Numerical analysis of passive safety systems in forklift trucks, Safety Science, 101, 98–107.
12.
Molnar V., Fedorko G., Husakova N., Kral J., Ferdynus M. (2016), Energy calculation model of an outgoing conveyor with application of a transfer chute with the damping plate, Mechanical Sciences, 7, 167-177.
13.
Rozylo P. (2016), Optimization of I-section profile design by the finite element method, Advances in Science and Technology - Research Journal, 10, 52-56.
14.
Rozylo P., Debski H., Kral J. (2018), Buckling and limit states of composite profiles with top-hat channel section subjected to axial compression, AIP Conf Proc, 1922, 080001.
15.
Rusiński E., Czmochowski J., Smolnicki T. (2000), The advanced finite elements method in load capacity structures, “in Polish”, Wrocław.
16.
Sun G., Tian J., Liu T., Yan X., Huang X. (2018), Crashworthiness optimization of automotive parts with tailor rolled blank, Engineering Structures, 169, 201–215.
17.
Szkielet. (2017), Passive Safety Official Website, Retrieved from http://www.bezpieczenstwo.stre....
18.
Wysmulski P., Debski H. (2017), The effect of eccentricity of load on the behavior of compressed composite columns in critical state, Polymer Composites, DOI https://doi.org/10.1002/pc.246....
19.
Estrada Q., Szwedowicz D., Silva-Aceves J., Majewski T., Vergara-Vazquez J., Rodriguez-Mendez A. (2017), Crashworthiness behavior of aluminum profiles with holes considering damage criteria and damage evolution, International Journal of Mechanical Sciences, 131-132, 776-791.
20.
Zienkiewicz O. C., Taylor R. L. (2000), Finite Element Method (5th Edition) Volume 2 – Solid Mechanics, Elsevier.
Share
RELATED ARTICLE
| eISSN: | 2300-5319 |
| ISSN: | 1898-4088 |
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
